Guide · Sizing
How to find out her ring size without ruining the surprise
Borrowing a ring, using a ring sizing stick or kit, and what to do when the only ring you have came off a different finger.

It is the question I am asked most before a proposal. You want the ring to be a surprise, but you also want it to fit on the day. The good news is that there are several ways to find out without having to ask her. A ring she already owns, a little detective work or a discreetly used ring sizing kit can get you surprisingly close, and I can help you with the rest.
Start with a ring she already wears
This is the most reliable way to find her size without measuring her finger directly. The important thing is choosing the right ring.
Ideally, you want a ring she wears on the ring finger of her left hand. This is the finger on which she will traditionally wear her engagement ring, so a ring from here should give you the closest match.
If you can't borrow one from her left hand, the next best option is the ring finger of her right hand (the third finger, next to the little finger). For most right-handed people, the fingers on their dominant hand tend to be slightly larger. As a general guide, her right ring finger may be around half a UK size to one full UK size larger than her left, although this varies from person to person. If you use a ring from her right hand, deduct around half a size to one full size as an initial estimate, rather than treating it as an exact conversion.
If neither is possible, a ring from another finger can still be useful, but there is no reliable number of sizes to add or deduct. Fingers vary considerably, even on the same hand, so I would treat it as a rough indication rather than a measurement.
Once you have the ring, put it back before she notices it has moved.
Measure it on a ring sizing stick
Once you've managed to borrow a ring, the best way to find its size is to measure it on a ring sizing stick. This is a jeweller's tool, with graduated sizes marked along its length, designed specifically for measuring rings.
Simply slide the borrowed ring onto the stick, taking care not to force it. Let it rest naturally and read the size at the point where the inside edge of the band sits. Make sure the ring is sitting straight and isn't tilted, as this can affect the reading.
I wouldn't recommend trying to measure the inside diameter with a ruler. The differences between consecutive ring sizes are only fractions of a millimetre, and even a small measuring error can make a noticeable difference to the fit. A ring sizing stick is a much more reliable way of establishing the size.
If you don't have access to one, a jeweller should be able to measure the ring for you. Alternatively, if you can borrow a ring for a few days, bring it to me or post it over and I'll measure it properly and let you know the size.

No ring to borrow? Try a ring sizing kit
If you can't get hold of a suitable ring, ordering a ring sizing kit is probably your next best option. These are inexpensive and easy to find online, and usually consist of a set of plastic or metal rings in different sizes, or an adjustable ring sizer that works rather like a small belt.
If she's a particularly heavy sleeper, you may be able to try one on her finger while she's asleep. It sounds a little mischievous, but it can be a very effective way of keeping the proposal a surprise.
The sizer should slide over her knuckle easily, rather than catching or needing to be forced. Once it's on, it should feel comfortable and secure, with enough room to move slightly but not so much that it could fall off.
To check the fit, try gently twisting the sizer and sliding it back over the knuckle. It should come off with just a little resistance, perhaps needing a slight twist, but shouldn't require significant force or cause discomfort. The knuckle should provide enough resistance to prevent the ring from slipping off accidentally, while still allowing it to be removed without a struggle.
Try a couple of sizes either side if you can, and pay attention to how easily each one goes on and off. The right size should feel snug without being tight.
If she wakes easily, or you're worried about disturbing her, don't risk it. There are other ways to get the measurement.
Which finger, and which hand?
Fingers are not interchangeable. The ring finger on the left hand is the one you want to match, and the corresponding finger on the right hand is likely to be around half a size to one full UK size larger for most right-handed people.
A ring worn on a thumb, index finger or middle finger tells you much less about the size you need. If that's all you can borrow, don't try to calculate a conversion based on the finger alone. Tell me which finger and hand it came from, and I can help you work out how useful the measurement is.
When you measure matters
Hands change size throughout the day and with temperature. They tend to swell slightly as the day goes on, and become smaller in the cold.
If you're measuring her finger directly, aim for the evening, when her hands are at a comfortable room temperature. Avoid measuring just after exercise, when she's particularly hot or cold, or when her hands are unusually swollen.
It's also worth considering her knuckles. If they are noticeably wider than the base of her finger, the ring needs to pass comfortably over the knuckle while still sitting securely once it's in place. This is one of the reasons a professional fitting is so useful.
Enlist help
A sister, a best friend or her mother may already know her ring size, or be able to find out without giving anything away. It's a surprisingly common question and, if they're good at keeping secrets, can be one of the simplest solutions.
Perhaps they can go window shopping one day, and just try on some rings 'for fun'. If you tell the jeweller in advance, they'll be able to take note of which size fits her ring finger.
If you can borrow a ring for a few days, bring it to me or post it over and I'll measure it properly on a ring stick. I'll tell you the size and return it safely, with a note about how closely it is likely to match the finger you're aiming for.
UK ring size chart
The chart below shows UK ring sizes alongside their approximate inside diameters in millimetres. I've included half sizes too, as even a small difference can make a noticeable difference to the fit.
E
13.7 mm
E½
13.9 mm
F
14.1 mm
F½
14.3 mm
G
14.5 mm
G½
14.7 mm
H
14.9 mm
H½
15.1 mm
I
15.2 mm
I½
15.4 mm
J
15.6 mm
J½
15.8 mm
K
16.0 mm
K½
16.1 mm
L
16.4 mm
L½
16.6 mm
M
16.8 mm
M½
17.0 mm
N
17.2 mm
N½
17.4 mm
O
17.6 mm
O½
17.8 mm
P
18.0 mm
P½
18.2 mm
Q
18.4 mm
Q½
18.6 mm
R
18.8 mm
R½
19.0 mm
S
19.2 mm
S½
19.4 mm
T
19.5 mm
T½
19.7 mm
U
19.9 mm
These are approximate measurements, and different jewellers' charts can vary slightly. Use the chart as a reference rather than treating it as a definitive size.
Every ring I make is available in sizes from A to Z, including half sizes.
What if the size is wrong?
Getting the size right before ordering is always the aim, but don't panic if you get it wrong! Many rings can be resized without issue. Designs with a continuous pattern running all the way around it can be better to order a little small rather than too big, as I can take some metal out from the inside of the band to make it fit.
If you're unsure about which way to go, speak to me before placing your order. I'd much rather spend a little time checking it with you beforehand than have you relying on a guess.
Wedding bands are a little different. These are best sized properly once you're both on board planning the wedding and the engagement excitement has settled. I can send you a ring sizer and that way, we can make sure they fit comfortably for everyday wear.

More from the journal
